Expert Wi-Fi Technicians

100 % Wireless Setup

Fast Wi-Fi Speed

Troubleshoot Routers and Extenders

Begin the Smart Setup Wizard

1. If your router came with external antennas, connect the antennas to the router first and then plug in the router to a power source.  If your router has a power switch, make sure that the power switch is set to the | (ON) position.  Wait until the power light indicator is solid.

2. Connect the ethernet cable from your modem to the internet port of the router.

3. Connect to your secured Wi-Fi.  You can locate the Wi-Fi credentials either at the bottom of the router or on the Quick Start Guide.  To prevent any problems during setup, make sure you have a good signal from the router by bringing the computer closer to it or moving the computer in the same room as the router.

NOTE:  If you are using a wired computer, skip step 3 and proceed to step 4.

4. Launch your web browser and enter “http://linksyssmartwifi.com” in the Address bar then press [Enter].

QUICK TIP:  If you are unable to launch the Smart Setup, you can enter the default IP address of the router, 192.168.1.1, or type myrouter.local in the browser’s Address bar.

5. Tick the checkbox beside I have read and accepted the License Terms for using this software then click Next to proceed.

Steps are as follows: 

  1. Open the Linksys Velop Set-up App and try to setup a primary node using it.
  2. In the Linksys App, also included a secondary node that is wireless setup.
  3. Once you’re done with Linksys smart Wi-Fi setup, go to the secondary node to the location where the internet signal typically remains weak.  Next, try to connect the node to a power outlet.
  4. Now, connect the secondary node to the primary node using Ethernet cable, and as you do so, the nodes will switch to wired connection automatically.

You can also setup your Linksys velop signin on Bridge Mode.

Here are the steps to Setup Linksys Velop signin in Bridging Mode: 

  • Open the Linksys app and go to the dashboard.
  • Tap on the “Menu” icon.
  • Now, click on “Advanced” settings and then, tap on ‘Internet Settings’.
  • Click on “Connection Type” or move to the “Internet Settings” page.
  • Now, click on change the connection type to “Bridge Mode”.

Troubleshoot Your Device

A fast connection is essential whether you’re working, playing, or relaxing. Use our speed test to make sure your network is giving you what you need.

Free Installation & Setup with new router

Peace of Mind

We’re committed to your complete satisfaction with our service. If you’re not 100% happy, we’ll do whatever it takes to make it right.

  • WHW03V1
  • WHW03V2
  • MR7300
  • EA9200
  • EA8300
  •  RE6700
  • RE6300

Steps For Configure Router and Extenders

Expert Wi-Fi Technicians

100 % Wireless Setup

Fast Wi-Fi Speed

Expert Wi-Fi Technicians

100 % Wireless Setup

Fast Wi-Fi Speed

Get in Touch With Wi-fi Technician.

Scroll to Top